Hi Jed.  Mr. Moncrief mentioned that you and he might want some
  Multisync II PCB's stuffed and waved over the shutdown (production)
  period.  If you have some sort of parts list for this board, I could
  pull a kit for them this week before we go.  Rick mentioned probably
  @ 25 boards.  What do you think?  

					Rob
					x 3925

     I have created preliminary bills of material based on input from
  Jed and run a component availability check for 25 boards.  I can
  supply all parts to Karen EXCEPT the following:

       p/n               Description            Qty short
     118010-103        Sip resistor                50
     128002-390        Cap                         25
     133041-001        Transistor                 145
     137023-001        IC, 74LS74                  56
     137038-001        IC, 74LS244                288
     137134-001        IC, 74LS245                312
     137144-001        IC, 74LS374                103
     137146-001        IC, 74LS393                 46
     137243-001        IC, Converter                3
     137437-001        IC, 74F04                   14
     137502-001        IC, 74F244                  42
     137518-001        IC, Prom                    25
     137646-015        IC, 15ns GAL               100
     137693-120        VRAM, 120ns, surf mnt      200
     137694-120        DRAM, 120ns                100
     137695-001        IC, Latch                   75
     179069-009        Connector                    4
     179118-011        Connector                   43
     179178-002        Connector                   34
     179257-024        Socket                      29
     179257-032        Socket                     335
     179259-020        Socket                      96
     
     Jed and I have discussed the surface mount issue with Fine Pitch.
  They are aware that the VRAMs are small outline J leads, 40 pin, with
  50 mil centers, and are due to Atari Games @ Jan 2.  I told them I 
  would try to get the boards and VRAMs to them on Monday, Jan. 6. I 
  also told them that a 5 day turnaround would suffice, which means that
  if all goes well Karen would have the assembled surface mount boards
  on @ Jan. 10 (Friday) or Jan. 13 (Monday).  
     Please be aware of the shortages to Karen's kit for 25 boards as
  listed above.  I am changing all quantities per on the kit to reflect
  only the amount I have available in our stockroom, so that no shortages
  will be created on the production shortage report.  Obtaining the
  above parts for successful completion of said 25 boards is now in the
  hands of our engineering group (Unless, of course, I am directed to 
  do otherwise by Mr. Stewart and/or Mr. Smith).
    I should have this kit pulled by Thursday morning of this week.
  Is it Karen I should call when the kit is available?
    Please get back to me soon if there are any changes, questions or
  comments pertaining to this scenario.  Thank you.

					Rob
					x 3925

     The kit is all pulled.  I can either hold it in the stockroom or
  give it to one of you this week.  If you don't get it this week, I
  won't be back to see you till Jan. 6 (Monday).  If it can wait till
  then that's OK too.  Let me know.  Thanks.
     And thanks, Jed, for the paste master.  Joe just gave it to me
  and I will send it to Fine Pitch with the boards when they come in.

					Rob

I do not want the parts...
.........................................................................
From:	MIKE::BRYANT       18-DEC-1991 14:24:39.24
To:	MARGOLIN,MONCRIEF,DOWNEND
CC:	BRYANT
Subj:	Multisync kit....
     The kit is all pulled.  I can either hold it in the stockroom or
  give it to one of you this week.  If you don't get it this week, I
  won't be back to see you till Jan. 6 (Monday).  If it can wait till
  then that's OK too.  Let me know.  Thanks.
     And thanks, Jed, for the paste master.  Joe just gave it to me
  and I will send it to Fine Pitch with the boards when they come in.


From:	KIM::MARGOLIN     18-DEC-1991 15:47:08.34
To:	MIKE::BRYANT
CC:	MARGOLIN
Subj:	RE: Multisync kit....

Don't give Downend the parts.

Jed

    I guess I won't give Downend the parts......

Please ask the PCB Vendor to deliver the MultiSync II boards to 675.

If they deliver them to Receiving I won't get them for at least a week.

Jed